The Anden Model A320V1 Dehumidifier is designed to dehumidify the air coming into the unit by passing the incoming air over an evaporator coil to drop the air temperature below the dew point of the air. Moisture is removed from the air and drained out of the unit to a common floor or waste drain. The air is then reheated in the condenser coil and exits the unit. Dehumidification occurs until the set point is reached, then shuts off until the control determines a need for operation.
Specifications:
Capacity(1) PPD at 80°/60%RH: 320
Energy factor(1): 2.9L/kWh - 6.0 pints/kWh
Voltage, phase, frequency: 208-240VAC, 1 phase, 60Hz
Current draw (amps)(1): 11.1
Power (Watts)(1): 2,310
Power cord type and length: SJT, 6-20P, 10ft
Hardwire: Field configurable
Breaker size: 20 amp
CFM: 830
Operating range Temp/RH: 60/50 to 85/80
Dimensions: 32 5/8"W x 24"H x 24 1/4"L
Weight: 180 lbs
(1)Rated capacity and energy factor test done and current draw measured in accordance with AHAM DH-1 2008 at 80°F/60% Rh inlet air at 0.0 ESP.
(2)Total cooling load.